Follow these easy steps to get your Zanussi ZT 56 RAL Refrigerator up and running in no time.
Remove all securing tapes from the refrigerator to ensure nothing obstructs the functioning of the appliance.
Clean the inside of the appliance with lukewarm water and a solution of bicarbonate of soda (5 ml to 0.5 litre of water). Avoid using soap or detergent as the smell may linger. Dry the interior thoroughly before use.
Place the refrigerator in a well-ventilated area, ensuring that the back of the appliance is close to the wall but does not touch it. Avoid placing the appliance in areas with restricted ventilation.
Adjust the level of the refrigerator by screwing out the adjustable foot, or feet, at the bottom of the cabinet using your fingers, ensuring the appliance is stable and does not wobble.
After installation, leave the refrigerator for 2 hours before turning it on to allow the refrigerant to settle properly.
Ensure the appliance is properly earthed. Connect the refrigerator to a power supply of 220-240 V / 50 Hz. Any electrical work required should be carried out by a qualified electrician.
Set the temperature using the thermostat, which has 6 positions and one 'OFF' position. An intermediate position is usually suitable, but adjust according to room temperature, how often the door is opened, and the amount of food stored.